SONDEX S Series Plate and Frame Heat Exchangers: S100–S188 Gaskets, Plates & Replacement Parts

SONDEX S Series plate and frame heat exchangers are used in industrial heat transfer and cooling applications where efficient thermal performance, serviceability and reliable sealing are important.

For equipment operators, sourcing compatible SONDEX heat exchanger gaskets, replacement plates and spare parts is essential for maintaining existing plate heat exchanger units.

This guide focuses on the SONDEX S100, particularly its glue-on gasket configuration, while also covering S110, S113, S121, S130, S145, S187 and S188 models.

Using S100 plate specifications and a real S100-IS marine spare parts enquiry, we explain plate dimensions, technical drawings, gasket selection, DN200 rubber port sleeves and marine applications.

SONDEX S Series Plate and Frame Heat Exchangers: S100, S110, S113, S121, S130, S145, S187 & S188 Models

A SONDEX plate and frame heat exchanger, also known as a gasketed plate heat exchanger (GPHE), transfers heat between fluids through corrugated metal plates.

Gaskets create separate flow channels, while the plate pack is compressed between the fixed frame and movable pressure plate.

Common SONDEX S Series replacement enquiries include:

SONDEX ModelReplacement Spare Parts
S100Gaskets, plates, end seals and rubber port sleeves
S110Replacement gaskets and plates
S113Gasket sets and heat exchanger plates
S121SONDEX S121 gaskets and replacement plates
S130Replacement plates and gasket sets
S145Gaskets and related sealing components
S187Replacement gaskets and plates
S188Gaskets and plate pack components

Whether purchasing SONDEX S100 gaskets, S110 gaskets, S113 gaskets, S121 gaskets, S130 gaskets or S188 gaskets, buyers should verify the exact equipment configuration.

Although these models belong to the same product series, plate dimensions, gasket profiles and attachment methods may differ.

SONDEX plates and gaskets should never be considered interchangeable based on model names alone.

SONDEX S100-IS PHE Plates: Dimensions, Technical Drawings and Replacement Plates for Plate Heat Exchangers

Plate dimensions are critical when selecting replacement plates for plate heat exchangers.

For the SONDEX S100, different gasket fixing configurations must be considered when identifying suitable replacement plates.

SONDEX S100 Glue-on Plate Technical Specifications

The following table provides reference specifications for the SONDEX S100 plate designed for a glue-on gasket configuration, based on the supplied technical data.

Technical ParameterSONDEX S100 Glue-on Plate
ModelSONDEX S100
Corrugation Depth2.6 mm
Port DiameterØ213 mm
Chevron Angle60°
Corrugation Pitch9.12 mm
Equivalent Diameter5.2 mm
Flow Area0.0016 m²
One Plate Area1.0 m²
Port Distance1489 × 395 mm
Overall Plate Dimensions1751 × 657 mm

These specifications refer to the supplied S100 glue-on plate reference. Actual dimensions and compatibility should be verified against the equipment drawings and existing plates before manufacturing.

Understanding SONDEX S100 Plate Dimensions

The listed 1751 × 657 mm dimensions describe the overall plate length and width.

The 1489 × 395 mm port distances are important dimensional references for checking the connection-hole arrangement.

The Ø213 mm port diameter is relevant when evaluating the plate opening and connection sealing components.

A corrugation depth of 2.6 mm, a pitch of 9.12 mm and a chevron angle of 60° describe important geometric characteristics of this plate design.

The specification also lists an equivalent diameter of 5.2 mm, a flow area of 0.0016 m² and an area of 1.0 m² per plate.

These parameters describe different aspects of the plate geometry and should not be confused with the total heat transfer area of an assembled heat exchanger.

Real Marine Equipment: SONDEX S100-IS

A Latvian shipmanagement company approached Senovis regarding replacement components for:

  • Brand: SONDEX
  • Model: S100-IS
  • Serial Number: 51423
  • Application: Marine heat exchanger maintenance

The customer confirmed that the required replacement gaskets were NBR Glue-on.

The S100 glue-on plate reference above is useful for preliminary technical comparison. However, its dimensions have not been independently verified against this particular S100-IS unit.

Before supplying replacement plates, the engineering team should confirm the original plate geometry, gasket groove, port arrangement, material and thickness.

SONDEX S100-IS Heat Exchanger Gaskets: Dimensions, Technical Drawings, NBR, EPDM, Glue-on, Clip-on & Sonderlock Options

SONDEX heat exchanger gaskets provide sealing between adjacent plates and help prevent external leakage or unwanted fluid mixing.

For the Latvian S100-IS marine enquiry, the customer required two sets of NBR glue-on gaskets.

SONDEX S100 Gasket Dimensions and Technical Drawings

The S100 glue-on plate reference provides several useful identification dimensions:

  • Overall plate size: 1751 × 657 mm
  • Plate port diameter: Ø213 mm
  • Port centre distances: 1489 × 395 mm

However, these are plate dimensions rather than complete gasket manufacturing dimensions.

A suitable SONDEX gasket drawing should also identify the sealing profile, gasket cross-section, port ring dimensions, attachment features and differences between standard flow gaskets and end gaskets.

The exact gasket dimensions must therefore be confirmed using the original gasket drawing or a measured sample.

NBR vs. EPDM Gaskets

NBR is commonly considered for applications requiring resistance to compatible oils and hydrocarbons.

EPDM is often selected for suitable water-based applications, including certain cooling and hot-water systems.

Material selection must consider operating temperature, pressure and fluid compatibility.

Glue-on, Clip-on and Sonderlock Options

SONDEX PHE gasket fixing methods may include:

  • Glue-on: The gasket is bonded into the plate groove using a suitable adhesive.
  • Clip-on: Mechanical fixing features secure the gasket to the plate.
  • Sonderlock: A mechanical retention configuration requiring the corresponding gasket and plate geometry.

These fixing methods are not automatically interchangeable.

Before purchasing replacement gaskets, customers should confirm the model, gasket fixing method, rubber material and required quantity.

SONDEX S Series Heat Exchanger Plates: AISI 304, AISI 316L and Titanium for Marine Plate Heat Exchanger Applications

Material selection directly affects corrosion resistance and service life in an industrial plate heat exchanger.

Common plate materials include:

MaterialTypical Selection Considerations
AISI 304Compatible freshwater and general industrial applications
AISI 316LImproved resistance to certain corrosive environments compared with 304
TitaniumExcellent corrosion resistance in many seawater applications

Why Is Titanium Important for Marine Cooling?

Shipboard heat exchangers may operate with seawater, freshwater, lubricating oil or other cooling media.

Seawater contains chlorides that can cause pitting and crevice corrosion in unsuitable stainless steel materials.

Titanium offers excellent resistance in many seawater cooling environments, making it an important choice for direct seawater applications.

However, titanium is not required for every marine heat exchanger. The correct material depends on the working fluid, temperature, pressure and original equipment design.

When purchasing replacement SONDEX plates, customers should confirm both the material and the plate geometry.

SONDEX PHE Rubber Port Sleeves and Connection Liners: DN200 / 8″ Measurement and Replacement Guide

Rubber port sleeves and connection liners provide sealing or protection around certain plate heat exchanger connection areas.

For marine maintenance, these components must match the actual connection structure.

Real Customer Case: SONDEX S100-IS DN200 Rubber Sleeves

The Latvian shipmanagement customer requested:

ItemSpecification
EquipmentSONDEX S100-IS
Serial Number51423
ProductRubber Port Sleeves
Quantity8 PCS
Nominal SizeDN200 / 8″
MaterialNBR HT
Additional Description50 mm PLAN

The supplied S100 glue-on plate data lists a Ø213 mm plate port diameter.

This provides a useful reference when evaluating the connection geometry, but the nominal DN200 sleeve designation and Ø213 mm plate opening describe different measurements.

The plate opening alone cannot determine the complete rubber sleeve dimensions or confirm compatibility with the customer’s S100-IS unit.

How to Measure Rubber Port Sleeves

Before ordering replacement connection liners, confirm:

  1. Inner Diameter (ID): The internal opening of the sleeve.
  2. Outer Diameter (OD): The outside diameter of the rubber body.
  3. Overall Length: The complete axial dimension.
  4. Flange Dimensions: The outside diameter and thickness of the flange or lip.
  5. Sealing Profile: Any shoulders, grooves or contact surfaces.
  6. Rubber Material: NBR, EPDM or another compound suitable for the operating conditions.

Clear photographs, original drawings and measured samples help suppliers evaluate the correct replacement design.

SONDEX S Series Plate Heat Exchanger Applications: Marine Cooling, Shipboard Systems and Offshore Heat Transfer

Marine cooling is an important application area for gasketed plate heat exchangers.

Depending on equipment design and operating conditions, SONDEX plate heat exchanger units may be used in:

  • Marine central cooling systems.
  • Seawater-to-freshwater heat exchange.
  • Main and auxiliary engine cooling.
  • Lubricating oil cooling systems.
  • Shipboard HVAC and refrigeration.
  • Offshore equipment cooling applications.

SONDEX S100-IS Marine Spare Parts Case

The Latvian customer required NBR glue-on gaskets and DN200 rubber connection sleeves for a SONDEX S100-IS heat exchanger.

The procurement process involved identifying compatible components, confirming the gasket fixing method and coordinating export arrangements.

This example illustrates how marine spare parts procurement involves both technical verification and international logistics coordination.

SONDEX S Series Spare Parts: Gaskets, Replacement Plates, Pricing, Lead Times and Why Choose Senovis

When purchasing SONDEX PHE replacement parts, procurement teams should consider technical compatibility, material quality, delivery schedules and total purchasing costs.

Important factors include:

  • Equipment model and serial number.
  • Plate dimensions and gasket fixing method.
  • Stainless steel or titanium material requirements.
  • Standard and end gasket quantities.
  • Rubber connection sleeve specifications.
  • Inspection, documentation and shipping requirements.

SONDEX Replacement Parts Pricing and Lead Times

Replacement gasket prices vary depending on rubber material, dimensions, fixing method and order quantity.

Heat exchanger plate prices depend on material grade, thickness, tooling requirements and production volume.

Specialised plates and custom rubber components may require additional manufacturing time.

For buyers seeking a low-cost SONDEX plate heat exchanger replacement solution, compatibility and material suitability should take priority over unit price alone.

Why Choose Senovis?

Senovis (Beijing) Technology Co., Ltd. supplies independently manufactured compatible plate heat exchanger spare parts for international industrial and marine customers.

Our product range includes:

  • SONDEX-compatible replacement gaskets.
  • Stainless steel and titanium heat exchanger plates.
  • Standard flow gaskets and end plate gaskets.
  • Rubber port sleeves and connection liners.
  • Fixed frame plates and movable pressure plates.
  • Complete plate heat exchanger units, subject to technical requirements.

Senovis supports technical evaluation using equipment model information, serial numbers, drawings, photographs and physical samples.

International shipping arrangements can be supported through DHL, FedEx, UPS and other suitable logistics channels.

Senovis products are independently manufactured compatible aftermarket components, not genuine SONDEX or Danfoss OEM products. Compatibility and availability must be confirmed for each equipment configuration.

Request a SONDEX S Series Spare Parts Quotation

Looking for SONDEX S100 gaskets, replacement plates, rubber port sleeves or compatible components for S110, S113, S121, S130, S145, S187 or S188?

Send us your equipment model, serial number, required quantity, material specifications and available technical drawings.

Senovis (Beijing) Technology Co., Ltd.

Website: https://pheheat.com

Email: sales@PHEheat.com

WhatsApp / WeChat: +86 1509 439 6595

Contact Senovis for technical evaluation and a quotation for suitable plate heat exchanger replacement components.

1人评论了“SONDEX S Series Plate and Frame Heat Exchangers: S100–S188 Gaskets, Plates & Replacement Parts”

  1. Pingback: Plate Heat Exchanger Rubber Liner Measurement Guide: ID, OD & Frame Plate Thickness – Senovis | Plate Heat Exchanger Manufacturer

发表评论

您的邮箱地址不会被公开。 必填项已用 * 标注

Save to list

滚动至顶部