Reliable replacement parts are essential for maintaining the efficiency and service life of plate heat exchangers. For operators using SONDEX S20 and S20A equipment, selecting the correct gaskets and plates requires more than matching a model name. Gasket attachment, plate dimensions, material compatibility, and operating conditions must all be considered.
At Senovis (Beijing) Technology Co., Ltd., we support international customers with compatible replacement gaskets and plates for industrial plate heat exchangers.
This article highlights a recent SONDEX S20A spare parts order for a Dubai customer, covering gasket compatibility, titanium plate specifications, material selection, technical verification, and export preparation.
SONDEX S20A Replacement Gaskets and Plates: A Dubai, UAE Customer Order
In 2026, Senovis supported a Dubai-based industrial customer with replacement gaskets and titanium plates for SONDEX S20A plate heat exchanger equipment.
The customer’s requirements included titanium TL flow plates, titanium end plates, and NBR Hang-on gaskets.
| Replacement Part | Specification | Quantity |
|---|---|---|
| Titanium Flow Plates | TL, 0.5 mm | 56 pcs |
| Titanium End Plates | TL, 0.5 mm | 2 pcs |
| NBR Hang-on Gaskets | S20-IG16-51 | 56 pcs |
Total: 114 replacement parts.
During the purchasing process, Senovis provided product information and technical support to help the customer evaluate suitable aftermarket replacement options.
Particular attention was given to the original equipment references, gasket attachment method, plate specifications, and consistency between the required components.
The order demonstrates why sourcing SONDEX S20 gaskets and plates involves more than simply selecting products by model name.
For replacement projects, accurate technical communication helps reduce specification discrepancies and supports smoother procurement.
SONDEX S20 vs. S20A: Gasket Compatibility and Plate Cross-Verification
Although SONDEX S20 and SONDEX S20A belong to related plate heat exchanger model families, their gasket configurations should not automatically be considered interchangeable.
The S20A configuration is associated with a Hang-on gasket attachment system, while certain S20 configurations use different gasket fixing arrangements.
A suitable SONDEX S20 gasket for plate heat exchanger applications must match the original plate’s sealing groove and attachment geometry.
Important verification points include:
- Equipment model and nameplate information
- Original gasket part number
- Gasket attachment method
- Plate dimensions and port arrangement
- Gasket groove profile and fixing features
- Plate material and thickness
- Operating conditions and fluid characteristics
For example, two gaskets may have similar external dimensions but different sealing profiles or attachment features.
This is why matching the gasket alone is not always sufficient.
Buyers may also encounter equipment designations such as sondex s20a st16. These model references help identify the heat exchanger configuration, but the actual gasket and plate specifications must still be checked before confirming replacement compatibility.
At Senovis, we emphasize cross-verification between the gasket and its corresponding heat exchanger plate to support accurate replacement-part selection.
SONDEX S20A Titanium Heat Exchanger Plates: 0.5 mm Thickness, Dimensions and Part Numbers
Titanium heat exchanger plates are commonly considered for applications involving corrosive fluids, including certain seawater and saltwater cooling systems.
Compared with conventional stainless steel, titanium can offer valuable corrosion resistance when appropriately selected for the operating environment.
For the Dubai order, the replacement plates featured titanium material, TL plate configuration, and a nominal thickness of 0.5 mm.
| Technical Parameter | Reference Information |
|---|---|
| Plate Model | SONDEX S20A |
| Material | Titanium |
| Thickness | 0.5 mm |
| Plate Pattern | TL |
| Reference Plate Length | 998 mm |
| Reference Plate Width | 230 mm |
| Vertical Port Distance | 894 mm |
| Horizontal Port Distance | 126 mm |
| Reference Port Diameter | 60 mm |
These dimensions are S20A identification references. Actual compatibility should be confirmed against the original equipment and corresponding components.
Different plate positions may require different part numbers, even when the material and nominal thickness are identical.
For buyers sourcing a SONDEX / Danfoss heat exchanger plate, checking only the overall dimensions is not sufficient.
Corrugation pattern, port configuration, gasket groove geometry, and plate thickness can all affect replacement suitability.
This is particularly important when purchasing titanium plates together with replacement gaskets for the same heat exchanger.
SONDEX S20 Hang-on vs. Glued Gaskets: Installation and Maintenance Differences
Gasket attachment methods influence installation procedures, maintenance requirements, and replacement efficiency.
SONDEX plate heat exchangers may use different gasket fixing systems, including Hang-on, glued, and other mechanical attachment designs.
Hang-on Gaskets
Hang-on gaskets use mechanical attachment features to secure the gasket to the plate without conventional adhesive.
Potential advantages include:
- No adhesive application during installation
- Convenient gasket positioning
- Easier removal during routine maintenance
- Reduced adhesive-related preparation work
Glued Gaskets
Glued gaskets are attached to the plate groove using a suitable adhesive system.
Installation may involve surface preparation, adhesive application, and curing time.
The appropriate fixing method depends on the original plate design and the intended operating conditions.
For the Dubai customer order, the selected replacement was an NBR Hang-on gasket, P/N S20-IG16-51.
When selecting SONDEX S20 replacement gaskets, the attachment method must correspond to the actual plate configuration. Glued and Hang-on designs should not be substituted without confirming compatibility.
NBR, EPDM or FKM: Selecting SONDEX S20 Plate Heat Exchanger Gaskets for Different Operating Conditions
Choosing the appropriate gasket material is essential for reliable heat exchanger operation.
Common elastomers used for SONDEX S20 replacement gaskets include NBR, EPDM, and FKM.
| Gasket Material | Typical Application Considerations |
|---|---|
| NBR – Nitrile Rubber | Mineral oils and selected industrial fluids |
| EPDM – Ethylene Propylene Diene Monomer | Water, hot water, and selected chemical applications |
| FKM – Fluoroelastomer | Certain elevated-temperature and chemically demanding applications |
Actual material suitability depends on the elastomer compound, fluid composition, operating temperature, and other service conditions.
Before recommending replacement gasket materials, important considerations include:
- Fluid type and chemical concentration
- Normal and maximum operating temperatures
- Working pressure
- Cleaning chemicals
- Existing gasket material and maintenance history
For example, a SONDEX S20 EPDM gasket may be considered for different operating conditions than an NBR gasket used with certain oil-based industrial fluids.
Similarly, equipment involving saltwater cooling requires careful evaluation of both gasket compatibility and plate corrosion resistance.
For the Dubai order, the specified combination was NBR Hang-on gaskets and titanium plates. This reflects the customer’s replacement requirements rather than a universal material recommendation for every SONDEX S20A installation.
How Senovis Verifies SONDEX S20 Gasket and Plate Specifications Before Production
At Senovis, technical verification goes beyond identifying the gasket model.
A replacement gasket should be evaluated together with its corresponding heat exchanger plate, rather than treated as an isolated component.
Our technical review focuses on three key areas.
1. Gasket Identification
We review available equipment information, original gasket part numbers, attachment features, photographs, and dimensional references.
2. Corresponding Plate Verification
We examine the matching plate specifications, including dimensions, port arrangement, material, thickness, gasket groove profile, and attachment geometry.
This cross-verification helps identify potential differences that may not be apparent from the gasket model alone.
3. Operating-Condition Assessment
Where operating information is available, we consider the process fluid, temperature, pressure, and maintenance conditions when evaluating gasket material suitability.
For customers seeking a high quality SONDEX plate heat exchanger gasket, these technical considerations are an important part of the replacement purchasing process.
They are also relevant when evaluating a SONDEX plate heat exchanger gasket customized factory or a supplier of compatible aftermarket components.
Where necessary, additional drawings, measurements, nameplate information, or component photographs may be requested before production confirmation.
By combining gasket identification, plate cross-verification, and material assessment, Senovis aims to reduce specification errors and support more reliable replacement-part sourcing.
SONDEX S20A PHE Spare Parts: Packing and Shipping Preparation for Dubai, UAE
After preparation, the Dubai customer’s SONDEX S20A replacement parts were packed into two separate packages for collection in China.
| Package | Contents | Gross Weight |
|---|---|---|
| Plywood Case | 58 Titanium Plates | 42.0 kg |
| Carton | 56 NBR Hang-on Gaskets | 6.4 kg |
| Total | 114 Parts / 2 Packages | 48.4 kg |
Final Packing Dimensions:
- Plywood Case: 107.5 × 30.5 × 23 cm
- Carton: 50 × 41 × 20 cm
- Total Volume: 0.1164 CBM
The titanium plates were packed in a plywood case, while the NBR Hang-on gaskets were packed separately in a carton.
The goods were prepared for customer-arranged pickup in Wuxi, Jiangsu Province, China, with supporting commercial and packing documents.
This case reflects the practical requirements of SONDEX heat exchanger UAE procurement, including technical coordination, replacement-part identification, packaging, and export preparation.
For international customers, accurate product information and organized shipping documentation help simplify spare parts procurement.
Why Global Buyers Choose Senovis for SONDEX S20 Replacement Gaskets and Plates
International industrial buyers need more than competitive pricing. Accurate specifications, technical communication, and responsive coordination are equally important.
Senovis focuses on supplying compatible aftermarket SONDEX PHE spare parts with attention to several key areas.
Technical Verification: Reviewing gasket and corresponding plate specifications together instead of relying solely on equipment model names.
Material Selection Support: Considering operating fluids, temperature, pressure, and maintenance requirements when relevant technical information is available.
Replacement Parts Supply: Supporting industrial maintenance projects involving compatible SONDEX gaskets and heat exchanger plates.
Cost-Effective Alternatives: Providing aftermarket replacement options for buyers seeking alternatives to original-brand spare parts.
International Coordination: Supporting quotations, technical information, packing details, and shipping documentation for overseas customers.
Whether customers are searching for SONDEX plate heat exchanger gasket supply or evaluating replacement gasket manufacturers, correct technical identification should remain a priority.
The same applies when sourcing SONDEX S20A gaskets, replacing titanium plates, or preparing spare parts for scheduled heat exchanger maintenance.
For procurement teams, a suitable supplier should be able to discuss both the requested gasket and the corresponding plate configuration, rather than treating each component independently.
Senovis supplies compatible aftermarket replacement components. SONDEX and Danfoss names and part numbers are used solely for equipment identification and compatibility reference. Senovis is not affiliated with the original equipment manufacturers.
Need SONDEX S20 or S20A replacement gaskets and plates?
Send Senovis your equipment nameplate, original part numbers, required quantities, plate photographs, and available operating conditions.
Our team can review your specifications and help identify suitable aftermarket replacement options.
Contact Senovis: sales@pheheat.com
Website: www.pheheat.com
