NBR vs. EPDM Gaskets in Marine Heat Exchangers: A Real SONDEX S100-IS Case Study

Marine plate heat exchangers operate in demanding environments where seawater, treated freshwater, elevated temperatures, and continuous engine operation place considerable demands on sealing components.

When replacing plate heat exchanger gaskets, two materials are frequently considered: NBR (Nitrile Butadiene Rubber) and EPDM (Ethylene Propylene Diene Monomer).

But which is more suitable for marine seawater cooling systems?

Based on a real inquiry from a Latvian ship management customer involving a SONDEX S100-IS plate heat exchanger, Senovis examines the practical differences between NBR and EPDM, their marine applications, installation methods, and the technical considerations behind selecting compatible replacement gaskets.

Why Gasket Material Selection Matters in Marine Plate Heat Exchangers

A marine plate heat exchanger (PHE) transfers heat between fluids while keeping them separated by metal plates and rubber sealing gaskets.

These systems are commonly used for:

  • Seawater cooling systems
  • Freshwater and high-temperature engine cooling
  • Lubricating oil coolers
  • Central cooling systems
  • Marine auxiliary machinery

The PHE rubber gaskets must withstand the operating fluid, temperature, pressure, and mechanical compression over time.

Selecting an unsuitable gasket material may lead to swelling, hardening, leakage, or premature deterioration.

However, gasket selection is not simply a matter of choosing the material with the highest temperature rating.

A reliable replacement must consider the original heat exchanger design, actual operating conditions, gasket compound, and installation structure.

For marine operators, maintaining compatibility with the equipment’s existing sealing arrangement is particularly important.

Real Marine Case in Latvia: NBR or EPDM Gaskets for a SONDEX S100-IS Seawater Cooler?

In October 2026, Senovis received an inquiry from a ship management customer in Latvia for replacement gaskets used aboard M/V TRANSUND, a seagoing vessel equipped with SONDEX plate heat exchangers.

The inquiry concerned a SONDEX S100-IS unit used in a cooling application involving seawater and treated cooling water.

Equipment information:

ParameterDetails
VesselM/V TRANSUND
Heat ExchangerSONDEX S100-IS
Serial Number51423
Manufacturing Year2011
ApplicationMarine cooling system
Required Quantity2 full gasket sets
Gasket InstallationGlue-on
Final Material SelectionNBR

During the quotation process, the customer discussed whether NBR or EPDM would be appropriate for the operating environment.

Both materials can be suitable for certain seawater applications, but their performance characteristics differ.

Rather than recommending a material based solely on the word “seawater,” Senovis discussed the service conditions and confirmed the customer’s preferred material and original gasket fixing method.

The customer ultimately confirmed NBR rubber gaskets, retaining the Glue-on installation arrangement.

This case illustrates an important principle: the most appropriate marine PHE gasket material should be selected according to the actual operating conditions, rather than a general assumption that one rubber type is always superior.

The same vessel subsequently generated inquiries for additional SONDEX S22-IG and S65-IS gasket sets, highlighting the importance of accurate technical identification across different onboard cooling systems.

NBR vs. EPDM Gasket Materials: Seawater Resistance, High-Temperature Performance and Service Life

NBR and EPDM are widely used gasket materials in industrial plate heat exchangers, but their chemical resistance and thermal performance are different.

Performance FactorNBR Rubber GasketEPDM Rubber Gasket
Seawater resistanceSuitable in selected operating conditionsGenerally suitable
Freshwater coolingSuitable, depending on treatment chemicalsGenerally well suited
Mineral lubricating oilGood resistanceGenerally unsuitable
High-temperature waterDepends on NBR compoundOften preferable
Ozone and weatheringGenerally less resistant than EPDMExcellent resistance
Typical temperature range*Approximately −20°C to +110°CApproximately −30°C to +150°C
Service lifeDepends on compound and operating conditionsDepends on compound and operating conditions

Temperature ranges are illustrative, not guaranteed operating limits. Standard and high-temperature formulations vary by manufacturer, and the actual service rating must be confirmed for each gasket compound.

NBR (Nitrile Butadiene Rubber) is particularly valued for resistance to mineral oils and many petroleum-based fluids.

EPDM (Ethylene Propylene Diene Monomer) is recognised for its resistance to water, hot water, ozone, and environmental ageing.

High-temperature EPDM gasket formulations may offer additional thermal performance, but they should not be assumed suitable for every steam or high-temperature application without verification.

Importantly, gasket service life cannot be determined by material name alone.

Water chemistry, temperature fluctuations, cleaning agents, compression, and operating cycles can significantly influence long-term sealing performance.

Why NBR Rubber Gaskets Are Commonly Used in Marine Plate Heat Exchangers

NBR gaskets for plate heat exchangers are widely specified in applications where resistance to lubricating oil and similar fluids is required.

Marine lubricating oil coolers are a common example.

Because mineral oil can adversely affect EPDM, NBR is often a practical choice for the oil-contacting sealing surfaces of these systems.

NBR may also be selected for seawater cooling applications when the compound and service conditions are suitable.

Several practical factors influence this choice:

  • Compatibility with the original equipment specification
  • Established performance in the existing cooling system
  • Familiarity during marine maintenance and replacement
  • Availability of compatible NBR gasket designs

For the SONDEX S100-IS case in Latvia, the customer ultimately selected NBR after discussing the available options.

However, NBR being selected in one marine project does not mean it is automatically better than EPDM for all seawater applications.

Can EPDM and High-Temperature EPDM Gaskets Also Be Used in Marine Seawater Coolers?

Yes. EPDM plate heat exchanger gaskets can also be suitable for marine seawater cooling systems, provided the operating conditions and gasket formulation are compatible.

EPDM is frequently selected for water-based applications because of its resistance to water, ozone, and heat-related ageing.

Potential applications include:

  • Seawater-to-freshwater cooling systems
  • Treated freshwater cooling circuits
  • High-temperature water cooling
  • Other compatible water-based heat transfer systems

For higher-temperature duties, a properly specified high-temperature EPDM gasket may be appropriate.

However, EPDM should not be selected solely because a system contains seawater.

The complete fluid environment must be considered, including chemical treatment, contamination, and possible exposure to mineral oils.

In particular, conventional EPDM is generally unsuitable for direct contact with mineral lubricating oil.

Both NBR and EPDM heat exchanger gaskets therefore have valuable roles in marine applications, but they are not chemically identical or universally interchangeable.

Marine Plate Heat Exchanger Gasket Replacement: Should You Choose NBR or EPDM?

When arranging a marine heat exchanger gasket replacement, the safest starting point is the original equipment specification and actual service environment.

For typical applications:

Marine ApplicationMaterial Selection Guidance
Seawater coolerNBR or EPDM, subject to compatibility verification
Treated freshwater coolerEPDM commonly suitable; NBR may also be acceptable
High-temperature water coolerAppropriate high-temperature EPDM or other verified compound
Mineral lubricating oil coolerNBR or another oil-compatible material
Mixed or chemically treated mediaEngineering verification required

In practice, both NBR and EPDM may provide satisfactory sealing performance in a compatible seawater application.

However, this does not mean their physical properties, chemical resistance, or service life are identical.

Can NBR and EPDM be used in the same heat exchanger?

Different gasket materials may be specified for different sealing positions when the exchanger design and operating fluids permit it.

Nevertheless, combining NBR and EPDM arbitrarily within the same gasket arrangement is not recommended.

Any material substitution or mixed configuration should be confirmed against the plate design, fluid contact conditions, gasket geometry, and operating requirements.

For marine operators, maintaining the original approved configuration is generally the preferred approach unless a technically verified alternative is available.

Does Gasket Material Affect Glue-on vs. Clip-on Installation in Plate Heat Exchangers?

Marine plate heat exchanger gaskets are commonly supplied in two installation configurations: Glue-on and Clip-on.

Both NBR and EPDM can be manufactured in either configuration, depending on the plate and gasket design.

Glue-on Gaskets

Glue-on gaskets are secured in the plate groove using an appropriate adhesive.

The adhesive must be compatible with the selected rubber compound, operating temperature, and installation conditions.

Correct surface cleaning, adhesive application, and curing are essential for reliable installation.

Clip-on Gaskets

Clip-on gaskets use mechanical fastening features to secure the gasket to the plate without conventional full-groove adhesive bonding.

Correct clip geometry, gasket elasticity, and plate compatibility are important for proper installation.

The main difference between these two arrangements is the gasket fixing structure, not simply whether the rubber is NBR or EPDM.

A Glue-on gasket cannot automatically be replaced by a Clip-on version unless the plate design supports that installation method.

In the Latvian SONDEX S100-IS project, the original equipment used Glue-on gaskets, and Senovis confirmed this requirement during technical communication.

For customers ordering compatible PHE spare parts, verifying the fixing method before production is just as important as confirming gasket material.

Why Choose Senovis as Your Marine PHE Replacement Gasket Manufacturer and Supplier?

As a customized PHE parts manufacturer and supplier, Senovis provides compatible replacement gaskets and plate heat exchanger spare parts for marine and industrial applications.

Our approach focuses on reducing technical uncertainty before production.

1. Pre-Sales Technical Confirmation

Senovis reviews the heat exchanger model, serial number, nameplate information, gasket material, fixing method, and required quantity before finalising the specification.

2. Practical Measurement Guides

When original drawings or detailed dimensions are unavailable, our team can prepare simplified measurement instructions to help customers identify critical dimensions.

For the TRANSUND project, technical clarification also involved DN200 rubber port sleeves, including questions about frame plate thickness and actual fitting dimensions.

3. Final Verification Before Production

Before manufacturing compatible replacement parts for plate heat exchangers, Senovis checks the confirmed material, geometry, quantity, and installation arrangement to help prevent ordering mistakes.

4. Reducing After-Sales Problems

Careful communication, clear measurement requirements, and production-stage verification help minimise the risk of incorrect parts, installation difficulties, and avoidable after-sales disputes.

Whether customers need NBR gaskets, EPDM gaskets, or other compatible PHE replacement components, our goal is to provide reliable technical support alongside competitive product pricing.

Looking for SONDEX marine plate heat exchanger replacement gaskets?

Contact Senovis with your equipment model, serial number, nameplate photo, and operating conditions. Our team can help identify a suitable compatible gasket solution for your marine cooling application.

Senovis supplies independently manufactured compatible replacement products and is not the original SONDEX equipment manufacturer.

发表评论

您的邮箱地址不会被公开。 必填项已用 * 标注

Save to list

滚动至顶部